How To Put A Barber Chair Together

Understanding the Structure of a Barber Chair

A barber chair is built from multiple interconnected components, including the hydraulic base, central support column, seat frame, footrest assembly, armrests, and recline mechanism. Proper assembly ensures stability, smooth operation, and long-term durability. Manufacturers such as Huiyi Furniture design their chairs with reinforced support frames, tightly machined mounting points, and user-friendly assembly structures to make installation faster and more secure.

Components Typically Included in a barber chair Kit

Main chair parts

• Hydraulic base

• Pump pedal

• Central column (mounting shaft)

• Seat and backrest

• Armrests

• Headrest

• Footrest and support bars

• Recline mechanism and linkage rods

• Decorative trim covers

• Bolts, screws, washers

Organize all parts before starting.

Tools You Will Need

• Socket wrench

• Screwdrivers

• Allen keys

• Adjustable wrench

• Rubber mallet

• Clean cloth

These tools help ensure a secure and accurate assembly.

Step-by-Step Guide: How To Put a barber chair Together

Step 1: Prepare the Assembly Area

Choose a flat, clean space where the chair can be safely assembled.

Before starting:

• Lay a protective pad

• Organize all hardware

• Verify that no parts are missing

A clear setup area makes the process easier and prevents damage.

Step 2: Set Up the Hydraulic Base

Place the hydraulic base in the center of your workspace.

Check:

• Base is level

• Pedal operates smoothly

• No dents or defects

Huiyi Furniture uses heavy-weight bases for improved stability, making this step essential.

Step 3: Mount the Chair Seat onto the Hydraulic Pump

This is one of the most important steps.

How to install:

• Lift the seat frame carefully

• Align the hole at the bottom of the chair with the top of the hydraulic pump shaft

• Lower the seat straight down

• Apply gentle pressure until the seat locks securely

A proper lock ensures rotation stability and eliminates wobbling.

Step 4: Install the Footrest Assembly

The footrest connects to linkage points under the seat.

Steps:

• Position support bars at the base of the seat frame

• Insert bolts with washers

• Tighten evenly on both sides

The footrest often synchronizes with the recline mechanism, so alignment is important.

Step 5: Attach the Armrests

Armrests typically attach using side-mounted brackets.

Instructions:

• Position each armrest on its designated bracket

• Secure using bolts or screws

• Tighten firmly

Armrests provide structural support in addition to comfort.

Step 6: Connect the Recline Mechanism

Some chairs come with the recliner pre-installed, but if not:

Install:

• Recline lever to the chair’s side

• Linkage bars to the footrest system

• Pivot bolts at backrest joints

Smooth reclining depends on proper alignment of these components.

Huiyi Furniture reinforces these joints to improve durability under daily use.

Step 7: Attach the Backrest

Position the backrest onto the seat frame.

Steps:

• Align pivot points

• Insert mounting bolts

• Tighten evenly

• Test the recline smoothly

Ensure the recline lever engages properly.

Step 8: Insert the Headrest

Slide the headrest into the designated opening at the top of the backrest.

Check:

• Headrest moves freely

• Locking pin engages securely

An adjustable headrest supports various grooming procedures.

Step 9: Add Decorative Covers and Trim

These pieces hide mechanical hardware and complete the chair’s appearance.

Steps:

• Snap or screw covers into place

• Ensure they do not block any moving parts

Huiyi Furniture includes molded trim pieces designed to fit securely over structural joints.

Step 10: Test All Chair Functions

Before using the chair:

Test:

• Pumping and lowering

• 360-degree rotation

• Reclining motion

• Stability at all heights

• Footrest movement

• Headrest adjustment

Any irregular movement should be corrected before the chair enters service.

Common Mistakes to Avoid

1. Not fully seating the chair on the pump shaft

This causes wobbling and unsafe rotation.

2. Over-tightening bolts

Can strip threads or damage metal components.

3. Misaligning recline linkage rods

Leads to uneven or jerky reclining.

4. Ignoring loose hardware during assembly

Later causes instability under weight.

5. Forgetting to test rotation and lift before use

Ensures issues are caught early.

How Huiyi Furniture Improves the Assembly Process

Chairs from Huiyi Furniture are engineered with features that simplify and strengthen assembly:

• Precision-machined seat mount for tight pump fit

• Pre-installed recline components to reduce workload

• Thicker steel frames for stability

• High-density cushioning for comfort after assembly

• Reinforced welds at stress points

• Heavy-duty pedals and linkage systems

These improvements help make the chair sturdy, stable, and long-lasting once fully assembled.

Maintenance Tips After Assembly

Tighten bolts every month

Prevents loosening from daily rotation.

Lubricate moving parts

Ensures smooth operation and reduces noise.

Keep the hydraulic base clean

Hair buildup affects rotation and pump performance.

Check hydraulic fluid yearly

Maintains strong lifting power.

Avoid exceeding weight limits

Protects the chair’s frame and hydraulics.